Tooltip
These resources have been reviewed and selected by STEM Learning’s team of education specialists for factual accuracy and relevance to teaching STEM subjects in UK schools.
Design and Manufacture a Scooter
This scheme of work is intended as an introduction to Autodesk Inventor. It is aimed at students aged 11-14, but is also suitable for students working up to and including post 16 dependent on experience.
The “Scooter” project teaches a range of fundamental Autodesk Inventor skills through a range of project-based activities and tasks. During each lesson, students complete New Learning tasks relating to parts and components of a scooter product. Following on from this, they are given Apply tasks so they are able to demonstrate their learning in a different design context.
This project provides a gateway to Autodesk Inventor, dveloping the following skills:
*2D Sketching, Constraints and Dimensions
*Extrude & Revolve
*Patterns
*Lofting
*Sweep
*Rendering
*Planes
*Orthographic & Engineering Drawings
*Shell, Fillets and Chamfers
*Assembly
*Ribs
*Decals & Sketch Text
*Drive Constraints
*STL Files
*Sheet Metal
Show health and safety information
Please be aware that resources have been published on the website in the form that they were originally supplied. This means that procedures reflect general practice and standards applicable at the time resources were produced and cannot be assumed to be acceptable today. Website users are fully responsible for ensuring that any activity, including practical work, which they carry out is in accordance with current regulations related to health and safety and that an appropriate risk assessment has been carried out.
Downloads
-
Scheme of work (teachers' notes) 133.71 KB
-
Lesson 2 - Extrude, revolve, pattern 50.55 MB
-
Lesson 3 - Shell, sweep, loft 53.56 MB
-
Lesson 5 - Assemblies 7.46 MB
-
Lesson 6 - Orthographic 70.81 MB
-
Lesson 8 - STL, exporting, CAM 44.92 MB
-
Lesson 9 - Sheet metal 22.47 MB
Show downloads
-
Scheme of work (teachers' notes) 133.71 KB -
-
Lesson 2 - Extrude, revolve, pattern 50.55 MB
-
Lesson 3 - Shell, sweep, loft 53.56 MB
-
-
Lesson 5 - Assemblies 7.46 MB
-
Lesson 6 - Orthographic 70.81 MB
-
-
Lesson 8 - STL, exporting, CAM 44.92 MB
-
Lesson 9 - Sheet metal 22.47 MB
-
-
Download all files as a .zip450.06 MB
Information on the permitted use of this resource is covered by the Category Three Content section in STEM Learning’s Terms and conditions.
